NEWMEN | Front Hub MTB FADE Straightpull 6-Hole silver | 15x110mm Thru Axle BOOST

NEWMEN front hub MTB FADE Straightpull 6-hole silver | 15x110mm thru axle BOOST

The FADE front hubs will also find many fans again. If you are looking for a lightweight yet resilient wheel center, you can hardly get past them. Here, too, you do not need to worry about setting the axial bearing play. The long-life bearings are precisely and stress-free already pressed in at the factory. A high degree of user-friendliness has been gained through this further development. You can better spend the saved time on your favorite trail.
Of course, only high-quality, double-sealed industrial bearings with a special lubricant are still used. The grease used by Newmen has a 25% higher water absorption capacity and a very high bleeding temperature, which protects the bearings from premature wear and corrosion.
Despite the relatively low weight, security was not compromised. It is better to build in a little more material at critical points, like. For example, at the transition between the brake disc and spoke mounts, as risking a defect.
Newmen is so convinced of the FADE hubs that they are also approved for e-bike use.

All Newmen hubs are developed and produced in Germany. This means that the manufacturing process can be optimized at any time and consistently high quality guaranteed.


Technical specifications:

intended use : Cross Country to Downhill, E-Bike
Material: aluminum 7075
axle type : 15x110 mm thru-axle Boost
Number of holes: 28 holes
Brake disc mount: 6-hole (IS2000)
bearing : 2x industrial deep groove ball bearings
Spoke type: straight pull (straight)
Spoke tension: 1200 Nm
maximum system weight: 120 kg (driver, bike, clothing and possibly luggage)
Color: silver with gray decals

Weight according to the manufacturer: 115g
Weight weighed: 112.8g